anyone running the microedge controller?

**0rion** · 02-13-2009, 09:58 PM

Just curious. Looking at getting that kit and was wondering if any of you guys are running a perm. wideband, gauge, and the controller and had any tips on how to do your logging? The LC-1 only has 2 analog outs so something has to get unplugged.

**Nick@HSW** · 02-17-2009, 11:33 AM

Shoot Robert56 over on tech a PM. He might have a few ideas for you.

Nick

**Eugenio_SS** · 02-19-2009, 06:46 AM

I run it fulltime...
have the gauge on the tri-pod A-arm.
There is a terminator that goes on the end of 1 connection (I have it in the ashtray) so when I connect the laptop, I connect it there.

This is the kit I have:
http://www.innovatemotorsports.com/x...cat=262&page=1

**0rion** · 02-19-2009, 08:11 AM

do you have a picture of that terminator plug? My LM-1 hooks up to tuners with basically a stereo jack with one end cut off that then hooks up to hpt's eio block. I guess I'm having trouble visualizing what that terminator plug is.

**Eugenio_SS** · 02-20-2009, 08:44 AM

the terminator plug is just a stereo jack with no wire... only a plastic cap... avoids getting garbage on the concection... that's it. It was included in the kit.

**0rion** · 02-20-2009, 10:48 AM

so when you log how many devices do you have hooked up at one time? Sounds like 2. I'm looking for a way to hook up 3. The microedge, an afr gauge, and hptuners. I get the terminator plug...that's the same set up I have with my LM-1 except one end doesn't have a plug.