Results 1 to 14 of 14
-
02-10-2015, 10:27 AM #1
Any interest in custom etchwork or decals?
Good afternoon everyone! I recently began doing etching and thought I would see if anyone would be interested in any pieces. I use a sandblasting method so all work is permanent and dishwasher safe, it will not rub off. Here are some examples of the work.
A stainless steel travel mug that I put a bird on. The only f-body piece I've made so far.
Here is some work that I recently completed for some of the fine folks over at the ZRXOA.
Pint glasses with the board logos
A motorcycle windscreen that one of the members sent to me
I can also cut adhesive vinyl decals as well. One I slapped on my toolbox
As long as I can fit the item in my cabinet, I can most likely etch it with whatever you would like. Let me know if anyone is interested. Thanks!Last edited by Decadence75; 02-10-2015 at 11:07 AM.
-
02-10-2015, 10:59 AM #2
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
the pictures arent displaying correctly.
-
02-10-2015, 11:08 AM #3
2000 Trans Am T56 Swapped - GMPP "HOT" Cam | LS6 Intake | PnP TB | 25% UD Pulley | Founders adjustable LCA/PHB/TA | Norris Catch Can | TSP 1-7/8 SS LT | TSP True Duals with bullets | SLP Lid | UMI Shock tower brace | Torq Thrust M 17x9 275/40 front 17x10.5 315/35 rear - YouTube Videos - My Car Site
-
02-10-2015, 11:09 AM #4
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by Vengeance SCCA and Car Show Approved
2019 Ram 1500 Crew Cab Laramie Limited
2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
06 Quad Cab HHHHemi - Sold
99 Hugger Orange Camaro - Sold
97 Camaro - Sold
-
02-10-2015, 11:13 AM #5
-
02-11-2015, 10:32 PM #6
Made some pint glasses tonight that are F-Body themed.
-
02-27-2015, 07:00 AM #7
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 55
- Posts
- 1,104
- iTrader
- 0
Silver- 1999 Trans-Am, 2012 Sonic
What would you want per glass? Or say a package deal on 6 and if you could figure in a general shipping included in the price? Looking good
-
02-27-2015, 07:21 AM #8
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
- iTrader
- 2 (100%)
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I like the firebird one...
-
02-27-2015, 07:56 AM #9
I normally sell them for $20 each plus shipping. If you want to order that many at once PM me and maybe we can work out a bulk discount.
I've also recently made one with the firebird that says WS6 underneath it along with alot of other stuff. I have a website up now where you can check it all out. Southern Glass Etching | Custom etching made to order Or you can hit up the facebook page www.facebook.com/SouthernGlassEtching
-
02-27-2015, 04:58 PM #10
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 55
- Posts
- 1,104
- iTrader
- 0
Silver- 1999 Trans-Am, 2012 Sonic
Wow! I was expecting $20-25 for the 6.....
-
02-27-2015, 06:45 PM #11
Wish I could sell them at that price point. You might be able to get close to that picking up a blank set at wally world. But I have to factor in that it takes me on average an hour to make each glass plus the consumables like blast media, nozzles, blast gun valve pads, nozzles, dessicant, packing material and you would not believed how much masking tape I go through. Then there is the wear and tear on things like the compressor, pressure blaster, stencil making equipment, regulators, quick connects, oil/air seperators, air filters, respirators, ect.
-
04-03-2015, 06:33 AM #12
Tax time sale! Get 15% off your order with the coupon code tax2015. Have a wide variety of items in the shop or can make a custom one with whatever you would like on it.
Southern Glass Etching | Custom etching made to orderLast edited by Decadence75; 04-03-2015 at 06:36 AM.
-
04-04-2015, 04:38 AM #13
I just picked up a stock of stainless 16oz travel mugs and 6oz stainless flasks if anyone is interested
-
04-10-2015, 09:51 AM #14
Here is a flask I etched last night.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Custom Made VT rear Spring seat isolators !! Any Interest??
By 5abivt in forum Suspension and HandlingReplies: 5Last Post: 09-07-2010, 12:15 AM -
custom decals? or after market?
By SHovV in forum Camaro / SSReplies: 9Last Post: 02-23-2009, 01:09 PM -
Question: Custom 'Bird TB decals
By JoshieDoom in forum Appearance SectionReplies: 4Last Post: 05-27-2008, 09:03 PM -
Custom True Duals....any interest?
By L3THAL_Z28 in forum Parts For Sale / TradeReplies: 58Last Post: 01-30-2008, 03:22 AM -
custom vinyl decals
By gotahemi2004 in forum General ClassifiedsReplies: 4Last Post: 10-12-2005, 06:58 PM
Bookmarks