Results 1 to 3 of 3
Thread: LS6 intake question
-
03-26-2010, 12:15 PM #1
LS6 intake question
Hi all. I have a 98 TA, all I have as upgrades is borla exhaust system and air lid. I recently decided to send the PCM to Frost for a tune. What a difference!
My question is: I want to get an LS6 intake, will I have to send the PCM back for another tuning if I use the same injectors I have in the current one?
Anyone had tuned their PCM and did this mod later?
I know that I should had done the LS6 intake 1st and then the tune but I didn't know ><. I don't mind sending the PCM back to Frost but i need some vacation days and some money for the tune again lol. Any input will be greatly appreciated. Thanks.
-
03-26-2010, 01:08 PM #2
Contact Frost and ask his opinion, personaly i would use the stock injectors and wait for a Re-tune.
If you plan on doing Cam or any other supporting mods i would do the Intake, cam, headers etc etc then send it off for a Re-tune.
J2001 SS, Its not the car its the Driver that matters....
-
03-26-2010, 05:01 PM #3
Thanks. I contacted Frost. He told me that the WOT curve would need a slight adjustment since the LS6 is more efficient. If it doesn't get adjusted it can cause knocking. I'll just wait and maybe do the cam and the LS6 intake at the same time. I'm holding off on headers, it gets too loud. This is my daily driver for now.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question on intake.
By Black95Z28 in forum External EngineReplies: 8Last Post: 08-02-2007, 05:56 PM -
Intake/TB Question...
By MikeSomething in forum External EngineReplies: 13Last Post: 07-13-2007, 09:08 PM -
ram air intake question
By bmwmteam in forum Firebird / WS6Replies: 33Last Post: 06-09-2007, 07:11 AM -
Intake Question
By bwinch in forum External EngineReplies: 1Last Post: 03-22-2007, 12:00 PM -
LSX Intake Question
By XtinKt in forum Firebird / WS6Replies: 6Last Post: 02-03-2006, 12:34 PM
Bookmarks