Results 121 to 136 of 136
-
04-14-2012, 12:30 PM #121
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 3,111
Silver & Blue- 02 Camaro SS, 04 GTO
Those 315's look great. I will be looking into those when my income tax return comes in.
My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 3200 Yank, 75k
-
04-14-2012, 11:38 PM #122
-
12-06-2012, 09:33 PM #123
think I might be doing this mod this weekend. got a set of Black ZR1 rims laying around with new rubber on them, and really would liek to see 315s on the back of the birdy. should be interesting
-
12-27-2012, 04:36 PM #124
I did this mod today and I'm just sharing my experience. I have a 2000 Trans Am with ZR-1 replicas. I have full UMI suspension, Kooks long tubes, Kooks true duels, lid, smooth below, all free mods. I didn't have to clearance anything. I did get side ways and heard a rub for a second so the BFH part of this mod will have to be done. I used Nitto 555's and they are by far the SHITTIEST tire I have ever used (street). I should have listened to the other people in the other threads about this tire. I have used Michellin Pilots, Riken Raptors, and Continental DWS Extremes. (All 275's) The best tires have been the Continentals. They stick to the road cold, hot, or wet.
-
12-29-2012, 10:30 AM #125
yep, its a really easy mod.
unless you have a strange offset that pushes the tire way inboard, the ZR1 C5 17x11s fit with minimal grinding.
mine fit nicely with UMI suspention, 1.25" Vogtland lowering springs, konis, and sumitomo 315s. just some cheap tires i had laying around. Ill get some Nitto NTO5s or Toyos later.
-
12-29-2012, 10:59 AM #126
have 315's on mine, didn't need to do any mods for them to fit thank God. I'm sporting the ZR1 17x11's on mine with Vredestein Ultrac Sessanta tires. did do some adjusting with the panhard bar though.
Last edited by jonnyman; 12-29-2012 at 11:04 AM.
-
02-13-2013, 08:43 AM #127
- Join Date
- Jan 2010
- Location
- Arlington,Texas
- Age
- 33
- Posts
- 815
Silver/Black- 00' z28-R.I.P 00' WS6 M6
A little while ago i went to a tire shop to throw on my C5Z06s. While they were putting the wheels on the owner of the shop stated that the wheels were in fact 10" even though the box said they were 9.5". He said to disregard the box and that they were definitely 10" wide. Therefore I'm considering throwing on a set of Nitto 555DRs I have laying around. I only consider doing so because I've heard these tires are not as wide as other 315s. Would I be ok? I ask because my 295 kumho ecstas aren't hooking for sheeeet ever since I got the cam/intake.
Here's a link to my wheels: Corvette Z06 Wheels
I know this may come off as a noob question/statement, but I just want to hear some opinions before I got out and try it.
-
02-13-2013, 08:59 AM #128
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
For most 315s you need at a minimum a wheel that is 11". However I have seen some that a 10.5" wheel is only required. I wouldn't put 315s on a 10" wheel. You could do 305s though.
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
02-13-2013, 09:06 AM #129
-
02-13-2013, 09:18 AM #130
-
02-13-2013, 02:27 PM #131
-
02-14-2013, 09:25 PM #132
Not to mention you want some sidewall for curb rash among other things.
-
09-25-2017, 07:55 AM #133
-
09-25-2017, 08:38 AM #134
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,786
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
If they are connected to Photobucket it's because of Photobucket is holding all images hostage because they want money to share your pics.
-
10-16-2017, 11:45 AM #135
- Join Date
- Oct 2017
- Location
- Ohio
- Posts
- 4
what do you mean update my account? I am new to this so not sure what I didnt do??
-
10-30-2017, 03:29 PM #136
- Join Date
- Oct 2017
- Location
- Ohio
- Posts
- 4
Why cant I see any pictures?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
How to Make a 1998 Pontiac Trans Am Glow in the Dark
By Ed Blown Vert in forum GTOReplies: 1Last Post: 01-28-2014, 05:59 PM -
Question: does crager make rims to fit a 02 trans am
By carnut7202 in forum Wheels and TiresReplies: 4Last Post: 05-09-2010, 09:49 PM -
Question: What parts make WS6 package 02 Trans Am
By wmacarter in forum Firebird / WS6Replies: 23Last Post: 11-14-2009, 12:39 PM -
how to make a trans am look like a 240sx
By myk02k in forum Appearance SectionReplies: 15Last Post: 04-25-2008, 05:38 PM -
Wonderig if they make fender for the Lt1 trans am that look like Ls1(fenders with sco
By wicked illusions in forum Appearance SectionReplies: 0Last Post: 08-16-2005, 05:26 PM
Bookmarks