what 15" racing wheel will fit?

**z06this** · 09-21-2008, 07:32 AM

Originally Posted by WS6ICK

Whats the advantage of running 15" instead of 17"? Do you have to grind the fronts as well? What backspacing should the fronts be?

No real advantage in the front other than a small amount of weight. In the back more sidewall, a definite advantage. You'll need spacers in the front.

**WS6ICK** · 09-21-2008, 08:04 AM

so you don't have to grind the fronts if you get spacers? I want to run 15X3.5 fronts. How thick of a spacer do I need? Where can you buy the spacers?

**blackbirdbrain89** · 11-15-2008, 12:11 AM

greg weld 15x 10 with a 6.5 offset any one think they will fit?? i need a set of back wheels but i could probly wait till spring

**mrr23** · 11-26-2008, 08:53 PM

Originally Posted by WS6ICK

so you don't have to grind the fronts if you get spacers? I want to run 15X3.5 fronts. How thick of a spacer do I need? Where can you buy the spacers?

1/4" - 5/16" thick no grinding.

**mrr23** · 11-26-2008, 08:55 PM

Originally Posted by blackbirdbrain89

greg weld 15x 10 with a 6.5 offset any one think they will fit?? i need a set of back wheels but i could probly wait till spring

it will depend on the tire size. click the link in the original post. that's what 15 x 10 with 7.5" backspacing and 275/50-15 tires will look like. a 6.5" backspacing will push the tire outward 1".

**hot93rod** · 12-19-2008, 11:42 AM

Originally Posted by z06this

So 15s just don't fit without grinding. Glad I got your input before I spent the money. Back to the drawing board. Know any companies that make light 16/17" wheels for street/strip apps besides billet specialties and center line? Know any aftermarket drag brake kits that would clear the 15s? Not really feeling the whole grinding thing. Thanks.

before you say that i have a set of 15x10s in the back of my 93, it did require a sawzall to the rear bump stops, but they fit other than that... along w/the spacers i have for them. I haven't changed the brake pads on it yet, but i'm fairly sure that i did have new pads on shortly before putting these wheels on

**hot93rod** · 12-19-2008, 11:44 AM

Originally Posted by blackbirdbrain89

greg weld 15x 10 with a 6.5 offset any one think they will fit?? i need a set of back wheels but i could probly wait till spring

like i just told zo6, i do have some 15x10 weld's and they do fit w/a spacer, but i'm not sure what the offset is on them anymore?? If you're interested i will be selling them, let me know!

**XcamaroZ06X** · 04-20-2009, 06:34 AM

what is the tire size for the front, along with the offset? is it 1 3/4 on a 4" rim with 195 50 15's?

**mrr23** · 04-20-2009, 11:27 AM

Originally Posted by XcamaroZ06X

what is the tire size for the front, along with the offset? is it 1 3/4 on a 4" rim with 195 50 15's?

15 x 4 with 1 3/4" backspacing. 165/80-15 or 165R15 tire. also, you'll need a 5/16" spacer to clear the front calipers.

**jambofla** · 05-11-2009, 05:07 AM

Originally Posted by mrr23

running a 15" wheel in the back of the fbody

15" x 7" w/4.5" backspacing
15" x 8" w/5.5" backspacing
15" x 10" w/7.5" backspacing

it will require a large amount of grinding of the rear calipers to clear the wheel. here's pics of what i had to do to mine. scroll to the bottom.
http://www.stealthram.com/wheels.htm

one thing to remember, if you do your grinding with half worn brake pads, when it comes time to replace them, the wheels may hit again. the thicker the brake pads, the further outward the caliper moves.

i encourage others to show what they put on and needed to do to get them to fit.

Are you running a drag slick on the back with the 15 X 10's?
What size tire?
Thanks for th info

Sorry man.
I went back and reread the original post and see that you are running drag radials
Looks good but how well does it hook up

**mrr23** · 05-11-2009, 06:51 AM

depends on the tire. last time out i had a 325/50-15 BFG drag radial. almost lifted the front off the ground.

**jambofla** · 05-11-2009, 07:40 AM

Killer!
That sounds encouraging but tough on the rear gear

**D.statt** · 11-13-2009, 05:03 AM

Will 10" wheels fit in the rear given the right backspacing?

What is the narrowest tire that can be put on a 10" wheel?

Anybody know max backspacing that will fit in the rear?

**joedude02** · 03-08-2010, 04:50 PM

Originally Posted by mrr23

follow the same guidelines.

after seeing about 10 threads in one week about what 15" wheel can i use, i made this.

the bolt pattern is 5 x 4.75"

i went to the wheel shop today looking to get some weld racing wheels and they told me the measurement was 5 x 120. what's the deal with that. i don't understand.

**camaro02sprspt** · 03-11-2010, 08:18 PM

Originally Posted by joedude02

i went to the wheel shop today looking to get some weld racing wheels and they told me the measurement was 5 x 120. what's the deal with that. i don't understand.

a 5x120 is the bolt pattern measured in millimeter, and a 5x4.75 is in inches i believe. might be wrong, its been known to happen

**joedude02** · 03-12-2010, 12:37 PM

measured with a digital gauge in metric and put the tape measure next to it and the measurement i got was 4 5/8.

**joedude02** · 03-16-2010, 12:00 PM

**prater_1** · 03-25-2011, 07:47 PM

My dad & I are building a drag car out of a 96 z28 and we were wondering what size drag rim and drag slick we can run? We are really new to this and dont really understand the ofset & back spacing issues!!! We would like to run a 10 inch slick!! Any & all help would be very much appreciated!!

**INMY01TA** · 06-07-2012, 04:53 PM

Bogarts will fit with no grinding or spacer but they cost some coin. Check out SJM Manufacturing.

**werewolf** · 02-27-2016, 09:35 AM

so what is the latest options for 15s in the rear of a 2001 Camaro with stock brakes? have more rims come on the market that don't require grinding or is grinding the calipers the only choice without swapping brakes?