Results 1 to 5 of 5
-
01-16-2019, 06:56 PM #1
120K mi clutch, press plate, flywheel
Just pulled the trans and pulled off the clutch pressure plate. Here's what I found. I bought the car in '08 and have put 120,000 miles on this clutch, pressure plate, and flywheel. Is this low wear normal? Should I replace it or reinstall it? I don't have a new disc to compare to, so I really don't know. Anyone's opinion would be appreciated! Thanks!
003.jpg
004.jpg
The first pic is the clutch disc, the second is the pressure plate which still has the ridges in the plate. The flywheel looks the same way with ridges still on the face of the flywheel. What do y'all think? Thanks!Ported/Polished throttle body, Lingenfelter launch module, SLP line lock, QTP exhaust cutout, LS7 clutch, K&N, Ceramic coated longtubes, no cats, 3" exhaust, Flowmaster "B", Eibach springs, Midwest Chassis 9" rearend w/4.10's
-
01-17-2019, 07:55 AM #2
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I responded in the other thread but I'll also add here that it looks like your still have a fair amount of material on the clutch that you still have valleys on the clutch material and the material looks to be quite a bit above the rivets.
Depending on your driving you could bet another 35-50k miles IMHO.
-
01-17-2019, 09:55 AM #3
-
01-17-2019, 10:23 AM #4
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Depends on the user.
-
01-17-2019, 11:05 AM #5
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: SPEC Products: Flywheel - Clutch - Pressure Plate etc
By LimeyZ in forum DrivetrainReplies: 6Last Post: 03-16-2012, 05:32 AM -
flywheel/pressure plate question
By SS#1531 in forum Manual TransmissionReplies: 1Last Post: 09-05-2007, 09:16 PM -
LS6 Clutch and Pressure Plate, LS2 Flywheel FOR SALE
By CChatter9 in forum Parts For Sale / TradeReplies: 0Last Post: 09-27-2006, 03:38 PM -
z06 clutch for sale, pressure plate clutch disk and flywheel
By themack56 in forum Parts For Sale / TradeReplies: 2Last Post: 07-06-2006, 07:15 PM -
T56 Mcleod Twin Plate Clutch,Steel Flywheel, and Pressure plate, less then 400 miles
By Wong in forum Parts For Sale / TradeReplies: 4Last Post: 03-09-2006, 05:01 AM
Bookmarks