What Brand of Converter are you using?

[Stretchs T/A]

Yank SS3600

[98turbols1]

Neal Chance custom converter/th400

[Hawk241]

Just ordered a Fuddle HPS 3,600...Trans GO shift kit and B&M trans cooler.., anyone can chime in on what to expect or shortcuts. 3.23s for now..Going to have a recommended "trans" guy do the work..I know I prolly need some sticky tires..thinkin of some Nittos soon..

[LS2Tuner]

Just ordered a Fuddle HPS 3,600...Trans GO shift kit and B&M trans cooler.., anyone can chime in on what to expect or shortcuts. 3.23s for now..Going to have a recommended "trans" guy do the work..I know I prolly need some sticky tires..thinkin of some Nittos soon..

Well if your "thinkin sticky" and Nittos your mistaken!!
Unless you plan on only trying to get them to work on a WELL preped track they will NEVER hook on the street unless you have a 13 second car.
Save yourself the wasted money and at least get the BFG's if your on a budget.
If money is NO object and your true goal is trying to hook on the street than get some M&H's. Our testing has shown that the Mickeys will hook up second best in drag radials with Hoosiers coming in third.
The Hoosiers are a little lighter than the Mickeys so it helps the mph but due to the lack of tread grooves they tend to spin easier on the street than the M&H's or Mickeys.
Either way I wouldn't run Nittos again unless they were on a daily driver.

[blackTA6585]

Just installed Vig 3600 and so far its great.

[99SSls1]

st2800 yank - not installed yet but will be soon. . .

[FuhBreezeE]

Where's B&M?

[440 rwhp trans am]

yank FTMFR

[Ryans99LS1]

I will be going with fuddle 36000 in spring time. Never heard anything bad and cant beat the price!

[Jay Dee]

I just did a lot of mods to my car and now I need a new torque converter. I just don't know what brand to get. The guy at the shop I but my stuff from says a TCI but i don't know. Last Dyno I had was 430 to the floor but I've done a few things so I'm expecting about 450-475. What do I need. WS6 convertable 2000.

[Ed Blown Vert]

I have been happy with my Vig 3200

[LS2Tuner]

I just did a lot of mods to my car and now I need a new torque converter. I just don't know what brand to get. The guy at the shop I but my stuff from says a TCI but i don't know. Last Dyno I had was 430 to the floor but I've done a few things so I'm expecting about 450-475. What do I need. WS6 convertable 2000.

Had nothing but bad luck with TCI's conv. They work ok until the baby get's bottle feed. I really like Daaco's conv. and you can't beat the price!

[shortdog]

Upgraded my Street Edge to a higher stall Pro Edge converter and the TCI is coming back out.

[TransAmy]

getting my fuddle 3200 installed on saturday!!

[LS2Tuner]

Upgraded my Street Edge to a higher stall Pro Edge converter and the TCI is coming back out.

What a surprise to hear of another car with a TCI being removed........

[shortdog]

Though, I got the tci rebuilt, along with my tranny it took out a few yrs ago, it's coming back out due to it being too loose for the bottle. The Edge is just a better made converter with anti-ballooning plates, etc.

[mghawk57]

John at Fuddle is the best - Service,tech advise and warranty

[Joels1]

I agree he knows his stuff.

[RacerBob]

Vig 3200. Not in yet.

[MSP01SS]

Though, I got the tci rebuilt, along with my tranny it took out a few yrs ago, it's coming back out due to it being too loose for the bottle. The Edge is just a better made converter with anti-ballooning plates, etc.

What size stall are you going with?