My Procharger Build - Kinda

**35th-ANV-SS** · 03-10-2011, 09:05 AM

Originally Posted by Mark98SS

Any parts arrive yet?

No, I've been trying to get a hold of Mark for days now...

**marksls1ta** · 03-10-2011, 06:09 PM

i have been in the hospital with some family that I am very close to and I have not been up to date with some things. I have sent you a pm with all pricing on it.

thanks,
Mark

**blackmagicturbo** · 03-11-2011, 12:52 AM

Originally Posted by FasstChevys

What compression? 8 psi? Meth injection also?

10:1 diamonds ,ported 241 ,h beams ,stock crank, stock sleeves,no meth 12 pounds d1, spec'd cam, 91 pump,, you will make more ..

**REVNORR82** · 03-11-2011, 03:00 AM

subscribed

**35th-ANV-SS** · 03-11-2011, 05:22 AM

Got the prices from Mark! Ordering this weekend. Thanks Mark, and sorry to hear about your situation. Hope it all works out!

**BashamWS6** · 03-11-2011, 06:45 AM

So what numbers are you looking at then?

**35th-ANV-SS** · 03-11-2011, 07:18 AM

low 11's at the track

**FasstChevys** · 03-11-2011, 08:06 AM

Originally Posted by blackmagicturbo

10:1 diamonds ,ported 241 ,h beams ,stock crank, stock sleeves,no meth 12 pounds d1, spec'd cam, 91 pump,, you will make more ..

Wow - 12psi, 10:1, and 91 octane.

That thing must be right on the jagged edge.

**blackmagicturbo** · 03-11-2011, 09:29 AM

good blowers with efficiency ,,you can get away with it ..

**pajeff02** · 03-11-2011, 12:32 PM

Originally Posted by 35th-ANV-SS

low 11's at the track

Faster than 11.49 = rollcage. Is that also in the plan?

**Packy** · 03-11-2011, 12:37 PM

Originally Posted by pajeff02

Faster than 11.49 = rollcage. Is that also in the plan?

That one always gets left out! I have forgot about since 2003... It's going to be a reality soon though finally. So I can quit getting the boot.

**35th-ANV-SS** · 03-11-2011, 01:12 PM

Originally Posted by pajeff02

Faster than 11.49 = rollcage. Is that also in the plan?

Not at the track I go to

**Packy** · 03-11-2011, 01:30 PM

Don't worry most tracks won't really enforce it until you go well under the 11.00 mark. At least in FL and NC. I don't advocate not running without one but I have been lazy in getting one as well.

**wooddaniel** · 03-11-2011, 05:53 PM

Originally Posted by 35th-ANV-SS

Well pulling the trigger this week. For my current goals I ended up getting the below. I think I'll be satisfied as this is mainly a street car that sees little track time.

Sometime down the road I might forge the bottom end and up the boost. We will see. At that time I'll deal with what I need to change (extra fuel pump/bigger injectors/FMIC/etc).

A guy that Frost recommended will be doing the install. I couldn't pass up his prices and I just don't have the time/space right now so I rather have someone who is confident and that has experience do this.

I will be posting up pictures and such as the car is in progress. Build starts in 3 weeks. Car gets tuned by Frost in May.

D-1SC Head Unit - Satin finish
- ATI brackets/hardware
- ATI Drain Upgrade
- ATI truck inlet hat/filter
- ATI damper
- ATI pinning kit
- 8 Rib Drive System
- Polished plenum
- upgraded ATI bypass valve
- ATI HO twin intercoolers

- Aster Tensioner Bracket
- LS2 Water Pump - Part #89018052
- Auto Meter Triple Pillar Pod, 2-1/16" - Part #43-12213
- Auto Meter 4904 - Auto Meter Ultra-Lite II Analog Gauges - Boost Gauge
- Auto Meter 6563 - Auto Meter Ultra-Lite Digital Series Gauges - Fuel Pressure Gauge
- Auto Meter 4378 - Auto Meter Ultra-Lite Digital Gauges - Wideband A/F Gauge
- Racetronix Fuel Pump - # F99-FPA
- Wiring Harness for fuel pump - # 99-FPWH
- Siemens Deka Mototron 60lb Injector: Set of 8
- AlkyControl Methanol Injection Kit - Complete kit #AC109 Kit
- Comp 918 valve springs and Manley 7.4" hardened push rods

For those of you who have never seen my car, pictures are in my profile.

Current mods are in signature. Hoping it all holds up after the install because I will be BROKE after this one for awhile

Awesome man, I know you have been wanting to do this for a while. Excited to see your results.

**BashamWS6** · 03-12-2011, 10:00 PM

What about driveshaft loop?

**tatertot91** · 03-12-2011, 10:27 PM

glad to see you're finally going through with this
wish you luck with it

Originally Posted by BashamWS6

What about driveshaft loop?

fairly certain hes got that already

**35th-ANV-SS** · 03-20-2011, 06:04 PM

Originally Posted by tatertot91

glad to see you're finally going through with this
wish you luck with it

fairly certain hes got that already

I actually do not have one :/

This kind of got delayed by about 2 weeks because I decided to apply for a new credit card that had 18 months of 0% financing on new purchases. I opted to sign up for it and to put it on that as opposed to spending a good chunk of my liquid assets for this. CC should be here tomorrow I am hoping. Parts will be on order as soon as I get it in the mail.

**35th-ANV-SS** · 03-24-2011, 09:24 AM

Parts have officially been ordered!!!!

**marksls1ta** · 03-24-2011, 09:25 AM

Thanks for the order!!

just send the shipping addy over

Mark

**35th-ANV-SS** · 03-24-2011, 09:29 AM

PM has been sent with billing/shipping info. Thanks Mark.

Thread: My Procharger Build - Kinda

Thread Tools

Thread Information

Users Browsing this Thread

Similar Threads

Help: ProCharger Build 385 sbc

Kinda no life, but still kinda sweet!

500CI Chevy LS1 Engine Build - How To Build A 500C

what kinda gun is this..... ?

Kinda of a new guy

Bookmarks

Bookmarks

Posting Permissions