12 bolt suspension parts?

**FuhBreezeE** · 08-15-2007, 08:21 AM

I bought a 12bolt moser rear end, will I have problems with a torque arm, lca's, panhard or any other parts? Or no problems at all?
Thanks ahead.

**Mr. Luos** · 08-16-2007, 07:38 AM

The only difference might be the torque arm and how it bolts to the rearend and if you get relocation brackets.

I used relocation brackets that fit a Moser rear for my 9" and my torque arm fit the stocker and the 9".
Some torque arms won't though.

**FuhBreezeE** · 08-16-2007, 07:40 AM

Thanks, just double checking.

**TwiSSter418** · 08-20-2007, 03:24 PM

All of my aftermarket suspension pieces bolted right on. (spohn torque arm, LCAs) (i did have relocation brackets welded on later though). The only issue was that I couldn't find swaybar mounts large enough to fit the bar onto the 12 bolt... they should be at any auto parts store though, Im just lazy and ran without it for a few months...

**FuhBreezeE** · 08-20-2007, 07:01 PM

Thanks for the additional input.

**Mr. Luos** · 08-21-2007, 02:47 PM

Originally Posted by TwiSSter418

The only issue was that I couldn't find swaybar mounts large enough to fit the bar onto the 12 bolt... they should be at any auto parts store though, Im just lazy and ran without it for a few months...

I went with the BMR relocation set. Worked great.