How not to do a burnout in a Chevy Z06

[Zinergy]

To the best of my knowledge you do your actual dyno run in whichever gear has a 1:1 gear ratio or the closest to that. So yes you shift but only to get to the proper gear. Cool videos btw.

Yep, unless you doing a 1/4mile run on the dyno.

[FasstChevys]

To the best of my knowledge you do your actual dyno run in whichever gear has a 1:1 gear ratio or the closest to that. So yes you shift but only to get to the proper gear. Cool videos btw.

4th gear for the record

[El Toro Loco]

THats almost as bad as this... like frost says, be scared of your tune lol... and arnt you suppost to shift on a dyno, at least the last few gears?

he's got some killer wheels on that Z

[Z28boy2000]

wow that is terrible! you would think someone would tell him to stop

[phoenixXIV]

that was the hardest i have laughed all week

[Too Fast]

"I hope your footage is well."

[JoshuaGrooms83]

lol very well lol

[HOBS]

that incorrect, you warm the car up first, you dont want to spin a bearing, then go thru the gears until you get to 4th then WOT, until you run out of rpms, or just before and off the gas. thats how we do it. just like fasstchevy said

What was I incorrect on?

[Lunatikgixxer]

that guy was a total jackass

[RJWZ28]

OK, no moron here, but I plan on picking up one of these cars in the near future and all of my brake-torque experience has been in auto cars. I completely understand not to pull the e-brake or ride the hell out of the clutch, but is there anything else I need to know? Obviously a Corvette has plenty of power to just dump it a light them up, but for a CONTROLLED stationary burnout, what is the proper way to execute without costing yourself a great deal more than tires?

[35th-ANV-SS]

I rev mine to 4-5K and dump the clutch for my burnouts. I also use a line-lock.

[The Popo]

What a jackass!!!

[RyanJM]

Clutch and tires are 2 different smells what is wrong with some people. If you don't know how to do it properly don't tape your stupidity .

[RJWZ28]

I rev mine to 4-5K and dump the clutch for my burnouts. I also use a line-lock.

A line-lock makes things stupid easy regardless of transmission, because you don't need to play games with your feet.

[35th-ANV-SS]

A line-lock makes things stupid easy regardless of transmission, because you don't need to play games with your feet.

Agreed 100%...and it helps not tear up the rear rotors/pads as well