Results 81 to 92 of 92
Thread: How do I remove swirl marks ?
-
03-20-2007, 07:01 PM #81
I believe I posted the "dano" link on the "other" board last Jan 24th
However, if you look at the autogeek website, it does list the yellow pad as the most aggressive pad. The dano link originated in europe I believe, and there might be some discrepancies on the Edge2000 pads color abrasiveness chart
http://www.autogeek.net/edge-2000-wave.html
-
03-20-2007, 09:17 PM #82
-
03-21-2007, 07:19 AM #83
-
03-21-2007, 07:21 AM #84
-
03-21-2007, 07:26 AM #85
-
03-21-2007, 08:16 AM #86
-
03-21-2007, 08:20 AM #87
- Join Date
- Dec 2006
- Location
- Jenks/Tulsa
- Posts
- 4,798
Light Pewter Metallic- y2k 8-cylinder catfish
I agree Goose, I am by no means an expert car detail guy but there wasn't much of a learning curve for me with the PC. Do not use too much product and let the polisher do the work without applying too much pressure on the surface.
-
03-21-2007, 10:00 AM #88
-
03-21-2007, 10:02 AM #89
Yea, I just want to make sure I get all the right pads and stuff the first time. They have some cool stuff on there, like the rag/pads that you can use to wax I am guessing... all I really need it for is to take all the swirls out of my TSX from letting them put it in their car wash, and then also a few touch ups on the camaro probably. what package would be the best for me??
-
03-21-2007, 10:14 AM #90
-
03-21-2007, 01:12 PM #91
As siggy said, there isn't much of a learning curve when using the PC for the first time. After ten minutes, you're good to go!
As far as pad goes, just get one othose kits that include pads. At a bare minimum, they will throw in there one of each pad you're going to need. I started with a couple of polishing pads (white) a black pad (finishing) and an orange pad (light cut) then thru trial and error I built up a little arsenal of products that work well with my PC. Remember, the fbody clear coat is very hard, and not just any product will remove some swirls. However, you must exercise patience to achive better results
-
03-27-2007, 07:06 PM #92
To all LS1 guys with BLACK paint jobs, liquid ebony is about THE best back in the day, and still hard to beat now!! Use after buffing to remove wheel marks etc... for that deep scratchless water finish!! Its by 3M. DEALER item only! Your move now!!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Removing Swirl
By FMBL in forum Showcar and DetailingReplies: 9Last Post: 02-23-2012, 06:06 AM -
What causes Swirl Marks?
By ls1camino in forum Showcar and DetailingReplies: 52Last Post: 03-25-2009, 09:45 PM -
Help: swirl marks
By Pony_Eater in forum Showcar and DetailingReplies: 18Last Post: 12-10-2008, 07:06 PM -
Swirl Removal?
By BlueMagicSS in forum Showcar and DetailingReplies: 11Last Post: 08-29-2008, 11:15 AM -
swirl marks?
By CamaroKurt in forum Showcar and DetailingReplies: 19Last Post: 10-26-2007, 06:29 PM
Bookmarks