Results 21 to 30 of 30
Thread: ASR-Traction control
-
08-27-2012, 06:34 PM #21
- Join Date
- Aug 2012
- Location
- Wikenberg, Arizona
- Posts
- 56
factory metalic red- 2002 Z28
mines blocked off. but if I were to get a asr switch and replace the blockoff would it work? all the wireing is there
-
08-27-2012, 06:38 PM #22
Mine was too, but like my previous post, if you don't have the NW9 RPO code I don't think the car has all the necessary hardware, even though it is wired for it. you do have an 02, but i doubt it's changed. best bet is to find someone with the ASR switch, and plug it into your car and see..
-
08-28-2012, 06:22 AM #23
-
08-28-2012, 09:59 AM #24
- Join Date
- Aug 2012
- Location
- Wikenberg, Arizona
- Posts
- 56
factory metalic red- 2002 Z28
Im a ls1 with an auto. I see where it would be
Sent from my SPH-D600 using Tapatalk 2
-
08-28-2012, 10:00 AM #25
- Join Date
- Aug 2012
- Location
- Wikenberg, Arizona
- Posts
- 56
factory metalic red- 2002 Z28
It would be right there by the other switch
Sent from my SPH-D600 using Tapatalk 2
-
09-06-2012, 12:34 PM #26
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
This thread just won't die...
And for the life of me I can't figure out why anyone would need ASR to begin with. My ASR is my right foot...
-
03-12-2015, 08:05 AM #27
- Join Date
- Dec 2014
- Location
- Pollocksville, NC
- Posts
- 4
Black- 1998
I just learn something from this old old post.. Wow and yes this is my first post as I just got my first Z28
-
03-16-2015, 01:37 PM #28
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
So, what did you learn?
And Congratulations on getting a Z28. Regarding 4th gens, I've had a 96 Z28 Vert and a 98 Z28 besides the 2002 Z28 I still have. FWIW, I sold the 98 with 189,xxx miles on it and it still got rubber in 2nd (about 2 car lengths when I kept my foot in it) and 3rd (it was a 6 speed). I won't go into the 3rd and 1st gens I've owned through the decades...67 Camaro: K-K + 797-z (look it up), 454/Th400/4.10 12-bolt = 6mpg, PS/PDB/PW tilt, tach, gauges...
2005 Corvette LS2/M6 Magnetic Red Metallic (What else would it be?) w/ Cashmere interior
2002 Z28: NBM/Tan, MTI smooth lid, smooth bellows, !AIR, !cats, 1-3/4" QTP SS LT's, 2-1/2" TD's with X-pipe, MagnaFlows dumped at axle, custom welded SFC's, MidWest Chassis body mount adjustable T/A, 3400 stall, 3.23 gears (was 2.73). Tuned: 343rwhp/357rwt (before TD's). Best: 12.559 @ 108+, 1.73 60' @ 3500' DA w/MT ET Street DR's.
Carbon footprint? CLOWN SHOE!
-
03-16-2015, 09:44 PM #29
- Join Date
- Dec 2014
- Location
- Pollocksville, NC
- Posts
- 4
Black- 1998
I learned what that button (asr) is for and why all the feedback on the gas pedal of course! I am very impressed with this 98 Z28 I bought it from the original owner with 124,000 on it and never been messed with. they sold it because the fuel pump went bad and her husband took out the gas tank and never put it back in after a year and a half seating in their driveway they figured it was time to sell so for 2K I picked it up. I put in a 2000 plastic gas tank and pump and away I went in my T-top Hot Rod.
-
03-16-2015, 10:46 PM #30
Quite the bargain
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
cruise control with traction control
By basballny2 in forum General HelpReplies: 12Last Post: 06-16-2010, 11:57 PM -
traction control
By racer426 in forum GTOReplies: 8Last Post: 12-16-2008, 07:04 PM -
traction control
By jordanvb in forum General HelpReplies: 15Last Post: 12-12-2008, 01:48 PM -
abs and traction control
By davidz28guy in forum CorvetteReplies: 7Last Post: 08-12-2006, 08:28 PM -
Traction Control
By daryl.l in forum Firebird / WS6Replies: 4Last Post: 03-05-2006, 01:05 PM
Bookmarks