Torque Thrust 2 rims

[JayL]

If you still have your stock 10 bolt rear end I would avoid the 18, it doesnt sound like much , but it puts alot more stress on the axles etc. I know it looks great, but it will shorten the life of that rear end quite a bit. Also if money is an issue, tires go way up in price for the bigger rims. Just a thought.

[initechpeter]

These rims look sick on T/A's.

[kingls1]

Would you guys recommend 18x11 on the rear or 17x11, Im thinking about 17x9.5 in the front. Also what is the best offset to get for these wheels? THanks!

you need to match the tire size front and rear so you would not want to mismatch the sizes or you will end up with it sitting higher in the rear. you could check with a tire co. on what tire sizes would match hight wise. I gave you the offsets & Sizes I used above in my post. Give the guy at RT a call he was very up on what you can and can't use on a F-Body. A 275/40/17 is 11" wide. I love the set up I have looks good from the rear and no mods to the car just a clean look. Good luck

[WS6 MANN]

If you still have your stock 10 bolt rear end I would avoid the 18, it doesnt sound like much , but it puts alot more stress on the axles etc. I know it looks great, but it will shorten the life of that rear end quite a bit. Also if money is an issue, tires go way up in price for the bigger rims. Just a thought.

Well I just dont want them to look small on the rear, I was going to get a new rear in the future but now that im spending on wheels mind as well do it right the first time. Just see alot of people with the 17's and havnt got to see anyone with 18's, I like the 17's tho but would be great to see the 18's.

[skandlus]

I love the TTII's!!! They make everything

[WS6 MANN]

So I finally got my torque thrust 2 wheels going to be installing them they are polished aluminum, is it recommended to polish or wax the wheels before installation?