Wire hide mod

[ghettosled]

You don't need to drill a hole to hide the hood latch cable. My hood latch cable is hidden and no hole was drilled for it. Do a little more studying in there and you will find a way to hide the hood latch cable without drilling

yeah, you are right - there is a way to run it on the inside of the strut tower.

in my case i used this hole to also relocate my amp's power line and alarm megaphone thingie wire. got to love iAIR pump as well!

[TempleU_WS6]

My local club is getting together in a couple weeks to do multiple mods. A local car repair shop is lending us the space to do it.

Here is another link to LS1 Tech on the mod:

http://www.ls1tech.com/forums/appear...al-inside.html

Yup, I've had that booked marked for a while now...


http://www.flickr.com/photos/lswon/s...740314/detail/

[cobrahunter]

Okay, I was unclear a bit. I'm trying to move the air hose that's on the drivers side 'underneath' the metal work that I've seen others do; like on the passenger side. I just want to make sure I don't drill a hole that's in the wrong place.

[Dr.Crash]

Okay, I was unclear a bit. I'm trying to move the air hose that's on the drivers side 'underneath' the metal work that I've seen others do; like on the passenger side. I just want to make sure I don't drill a hole that's in the wrong place.

most people get ride of that AIR hose. its pretty easy to do.

[Spikito]

can you do the same for fuel lines on the driver side?