Ride height question QA1r's and V6 springs

**01WS6475hp** · 07-20-2008, 02:49 PM

I'm curious what you guys cars ride height is. I have BMR lowering springs on the rear with my QA1r's up front lowered. It was slammed pretty good front and back. We l just got thru removing the rear BMR springs that were to stiff for the track and replaced them with some V6 springs and comp engineering shocks set at 50/50. Wow now I'm riding high unless Im in shock because what I was use to. My measurements are
28.5 rear drivers
28 rear pass
27 front drivers
26.5 front pass
I just raised my front up half inch to balance it out some. Does this sound right for a V6 springs in the rear and QA1's up front.

**LS2Tuner** · 07-21-2008, 04:23 PM

Every car is different depending on tire size and load. Just cut a 1/4 coil out of the V-6 springs at a time until you get it to the lowered height you want. We usually cut around 3/4-1 coil for car that has 1.5"-2" drop in the front. Remember to fill the tank up and we usually even take some eight and put it in the drivers seat to mock up the real weight.

**01WS6475hp** · 07-21-2008, 05:17 PM

I think its just me right now. I'm use to the BMR's. I put these in for the drag strip only. I might just put my WS6 springs back in also and see how they compare at the track after I run this weekend with these V6 springs. I know the BMR's cant be helping me at the track with my rotten 2.1 60 ft.