Seat Heaters!!!

**camarojunky74** · 11-26-2007, 11:05 AM

i found the ones i like, not sure when im gonna do it, kinda worried about taking off the leather and such, shoudlnt be that bad,

gonna mount the switch on each door where the door locks and window motors are and such, or maybe hide them in the console above the coin holder that might be better

**02ultraZ** · 11-26-2007, 11:23 AM

Originally Posted by camarojunky74

http://cgi.ebay.com/ebaymotors/2-Sea...spagenameZWDVW

Those buttons are a nice touch with the multicolor led. Wouldn't look bad if mounted in the right spot...

**Mr. Hyde** · 11-28-2007, 01:04 AM

With my smart ass joking aside, I used to live in Moreno Valley for 12 years, not too far from where you are in Corona, and I can attest to the fact that it does get COLD, people think that because it's southern California, it never gets below 72 degrees. My pool used to get a thin layer of ice in Dec. Let us know if you figure out how to make it work, becuse up here in Washington, it gets even COLDER!

**camarojunky74** · 11-28-2007, 07:55 AM

Originally Posted by 01LSS6Camaro

With my smart ass joking aside, I used to live in Moreno Valley for 12 years, not too far from where you are in Corona, and I can attest to the fact that it does get COLD, people think that because it's southern California, it never gets below 72 degrees. My pool used to get a thin layer of ice in Dec. Let us know if you figure out how to make it work, becuse up here in Washington, it gets even COLDER!

lol will do, i just have to buy that kit and wire the bitch up shouldnt be that bad,

**BrntWS6** · 12-02-2007, 05:42 PM

I did this in my GTP and it wasn't that hard. You just wanna make sure you wire it to a correct hot leg, so the seats turn off with the car. And As long as your leather is in good shape (not dried out or cracked) you shouldn't have any issues peeling the seat covers off.

**camarojunky74** · 12-02-2007, 05:44 PM

yeah i figured the hot only when key in was most important not being sarcastic lol

**blue02Z** · 12-05-2007, 10:56 AM

cant you swap in some vette seats with heaters and make it work? if not you could put the switches on the side of the seat next to the adjustment switches, like where they are on cobalts

**02ultraZ** · 12-05-2007, 11:00 AM

Originally Posted by blue02Z

cant you swap in some vette seats with heaters and make it work? if not you could put the switches on the side of the seat next to the adjustment switches, like where they are on cobalts

I read in another thread that vette seats won't fit. Maybe with some home made brackets you could get them in there.

**camarojunky74** · 12-05-2007, 12:43 PM

i like vette seats, but only in a vette, i would rather use mine, im really really picky about that kind of stuff

**red99ws6** · 12-07-2007, 05:20 PM

jegs has aftermarket seat heaters. you just pull the seat cover off and basically cut the foam so it fits flush and it has a couple wires you have to hook to a 12v source