Another Project Completed

LS6 Valley Cover tray
99' Knock Sensors and Wire Harness Upgrade
Catch Can

All installed

LS6 Valley Cover Tray and 99' Knock Sensors
http://i584.photobucket.com/albums/s...s/100_5859.jpg

All done
(Sorry about the glare)
http://i584.photobucket.com/albums/s...s/100_5860.jpg

http://i584.photobucket.com/albums/s...s/100_5861.jpg

Oops, this is why I had a codes for my Knock Sensors. Might also explain some oil lost over the past couple months. Must had happen when I installed the LS6 Intake. Used some heat resistant tape this time to hold it in place. :D

http://i584.photobucket.com/albums/s...s/100_5858.jpg

Nice work!!

Cutlas I did route the hosing proper right?

I believe so. Depends on what the inside of the can looks like, but most get plumbed that way

The hose from the LS6 cover tray goes into the top. This shows the filter of the catch can.

http://i584.photobucket.com/albums/s...n/100_5853.jpg

did you remove the pcv valve?

Yes, see pic 2 and 3

come & do mine !!!!:happy:

Quote:

---

Originally Posted by SMWS6TA

The hose from the LS6 cover tray goes into the top. This shows the filter of the catch can.

---

Yep you plumbed it correctly then!

Nice job! Interesting how that wire harness got smashed in place like that. I'll have to remember to watch out for it if I ever end up pulling my intake.

wonder if my empty bud lite can would make a good catch can :cheers:

Nice work!

Good job.