I performed a shifter swap the other day using this sitcky. It was tremendously helpful. Thank you, Knight.
I wanted to share some of my experiences for anyone who might run into similar issues. I have a 98 Camaro convertible, in case it matters.
First, to remove my center console, there were two additional 13mm bolts holding it in place located on either side right underneath AC controls. These bolts are the same size as the other three.
I found that the parking brake got in the way a little bit when removing the center console, so I had to tug/force it to clear while removing the center console. Because I could not get my cigarette lighter unplugged without lifting the console, I just left it plugged in (mine is also different than the one in the pics), but I did have to unplug the 12v outlet to be able to move the console freely and clear of the workspace (I just set it in the passenger seat).
On reassembly, I noticed that my dash light was not working (when I turn on my lights, the dash does not light up, and the odometer disappears instead of dimming). I took it all apart again looking for an unplugged wire but found nothing. When I turned on the parking lights, I could hear the switch clicking just behind the nob. When I turned on the headlights, I could hear another switch clicking under the dash near the AC controls, however, without knowing which wires were which, I did not want to mess with it right away.
I still have not figured this one out, so if you're doing a shifter swap, be careful with your wiring.