(1) REPAIRED 215CC Trick Flow cylinder head GenX C
For sale is (1) 215CC, CNC ported GenX Trick Flow cylinder head. It is a bare cylinder head that had the pushrod holes bored for a larger pushrod. Unfortunatly (2) of the pushrod holes were cut to deep and broke through the intake port. The heads have been repaired, pressure tested and flow tested. They still flow the factory cfm. The repair is only about a 1/4" on each port. As a matter of fact, I saw the port before it was repaired and it was basically a pin hole. The shop that repaired it is very reputable and guarantees it to function as it was originally intended to. This head is brand new except for the repairs done to it.
If you are interested, I can PM you the serial# that is cast into every TFS to identify it and its production date.
If you want a set of these heads, this is a good way to knock of a good chunk of change off of the final price. I gained 60 RWHP with just these heads using a stock cam!
I am asking $550 O.B.O. + $15 shipping
(Serious inquiries only. Please do not waste my time with LOW BALLING)
If you are interested, PM me and I will send you back my cell#. I am tired of all of the PM's. I can give you all the info you need in 5 minutes on the phone instead of 20 PM's back a forth.
http://i118.photobucket.com/albums/o...8/DSCI0006.jpg
http://i118.photobucket.com/albums/o...8/DSCI0001.jpg
http://i118.photobucket.com/albums/o...8/DSCI0003.jpg
http://i118.photobucket.com/albums/o...DSCI0010-1.jpg
http://i118.photobucket.com/albums/o...8/DSCI0011.jpg
http://i118.photobucket.com/albums/o...DSCI0018-1.jpg
[IMG][/IMG]